2021-07-29 The laminating machine has high requirements for temperature control. If the temperature is too high or the heating time is too long, the film quality will deteriorate, and there will be no heating. If the temperature is too high during drying, the surface of the adhesive will form a crust, causing the film to bubble. Excessive thermal stress can also lead to the loss of elasticity of the film, resulting in performance degradation and easy tearing. In physics, there are three methods of heat dissipation: conduction, convection, and radiation. The first two methods have been covered
Read More →
2021-07-20 The low-temperature laminating machine completes the lamination and mounting of plates and images using high temperature and pressure. Compared to cold laminating machines, it has lower costs but better results, and the appearance of the mounted products can be preserved for a longer period of time. It is suitable for laminating all flat plate and roll media. Its characteristics are: 1. It can be heated and pressurized, with absolutely no bubbles or wrinkles. 2. It has the function of self-uncovering the bottom paper, saving labor, and can
Read More →
2021-07-14 The single machine is equipped with the function of 6-roll film, eliminating the need for frequent film changes; Dual function of cold mounting and hot mounting, one machine for both purposes; Automatic film covering, easy to use; Infrared temperature control, no damage to rubber rollers, more precise temperature control; The upper film lamination method makes lamination easier; it adopts both foot-controlled and automatic lamination modes; only one person is needed for operation, reducing labor costs; Unilateral linkage, easy to elevate and heat up to 100 degrees
Read More →
2021-07-08 The vacuum laminating process of a fully automatic laminating machine involves vacuuming the space between the film and the artwork, followed by setting it at a certain temperature to complete the lamination. Its operation method is complex, the cost is high, and the image size is subject to certain limitations. However, the mounting quality is high, the image texture is strong, and it is suitable for photographs. It is more suitable for laminating various art prints and is widely used in processing various book covers, pictures, packaging cartons, and handmade crafts
Read More →
2021-07-01 The use of electric laminating machines actually depends on the situation. Soft membrane ceilings are not necessarily required for decoration. The main reason for using soft membrane ceilings is their excellent waterproof and moisture-proof functions. Therefore, soft membrane ceilings are widely used in many decorations. I hope this information can help you. It's just a matter of terminology. In most cases, ordinary paper is used for printing and copying
Read More →
2021-06-24 The laminating machine has very high temperature requirements, so we need to pay attention to the corresponding measures during practical application. So, how to operate it in detail? If the temperature is too high or the heating time is too long, the film quality will deteriorate, and no heating is applied. If the drying temperature is too high, the surface of the adhesive will form a crust, causing the film to bubble. Excessive thermal stress can also lead to the loss of elasticity of the film,
Read More →
2021-06-17 The laminating machine has high requirements for temperature control. If the temperature is too high and the heating time is too long, the film quality will deteriorate, and there will be no heating. If the drying temperature is too high, the surface of the adhesive will form a crust, causing the film to blister. Excessive thermal stress can also lead to the loss of elasticity of the film, resulting in performance degradation and easy tearing. In physics, there are three ways to dissipate heat: conduction, convection, and radiation. The first two methods have been cleared
Read More →
2019-11-30 The ink layer condition of printed materials primarily encompasses the properties of paper, ink functionality, ink layer thickness, appearance of graphics and text, and the integrated density of printed graphics and text. Their impact on the quality of laminating is mainly reflected in the adhesive strength between the printed materials and the film. 1. Ink layer thickness. When the ink layer of printed materials is thick and the graphic area is large, these inks alter the porous surface characteristics of the paper, closing many pores
Read More →
2019-11-20 Characteristics of laser cutting machine 1. Fast cutting speed, smooth and flat incision, no burrs; 2. The cut is narrow, with minimal deformation, and the material on the cutting surface does not harden; 3. High machining accuracy and good repeatability; 4. CNC programming is simple, with a wide range of machining capabilities, no need for mold making, and is economical and time-saving; Types of auxiliary air sources 1. Nitrogen: generally used for processing precious metals or for processing requirements
Read More →